Texas Instruments DM6467, User Manual

Page: 20 / 78

Installation Overview
2-2
2.1 System Requirements
This section describes the hardware and software requirements for the
normal functioning of the codec component.
2.1.1 Hardware
This codec is built and tested on the DM6467 EVM only.
2.1.2 Software
The following are the software requirements for the normal functioning of
the codec:
‰
Development Environment : This project is developed using Code
Composer Studio version 3.3.49.
‰ Code Generation Tools : This project is compiled, assembled,
archived, and linked using the code generation tools version 6.0.8.
2.2 Installing the Component
The codec component is released as a compressed archive. To install the
codec, extract the contents of the zip file onto your local hard disk. The zip
file extraction creates a top level directory called
200_V_H264AVC_E_1_10, under which another directory named
DM6467_BP_001 is created.
Figure 2-1 shows the sub-directories created in the DM6467_BP_001
directory.
Note:
The source folders under H264Encoder (
AlgSrc
) is not present in case
of a library based (object code) release.