Texas Instruments DM365, User Manual

Page: 31 / 131

Installation Overview
2-7
LevelIDC = 30 # Level IDC (e.g. 20 = level 2.0)
IntraPeriod = 30 # Period of I-Frames
IDRFramePeriod = 0 # Period of IDR Frames
FramesToEncode = 10 # Number of frames to be coded
SliceSize = 0 # Size of each slice
EnMeMultiPart = 0 # 1 => Enable MB Partitions,
0=> Single MV for each MB
RateControl = 1 # 0 => CBR,
1 => VBR,
2 = Fixed QP
MaxDelay = 2000 # Delay Parameter for Rate Control in
Milliseconds
QPInit = 28 # Initial QP for RC (-1,0-51)
QPISlice = 48 # Quant. param for I Slices (0-51)
QPSlice
= 48 # Quant. param for non - I slices (0-51)
MaxQP = 42 # Maximum value for QP (0-51)
MinQP = 0 # Minimum value for QP (0-51)
MaxQPI = 40 # Maximum value for QP for I frame(0-51)
MinQPI = 0 # Minimum value for QP for I Frame(0-51)
IntraThrQF = 0 # Reserved
AirRate = 0 # Number of Forced Intra MBs
UnRestrictedMV = 0 #1: Enable 0:Disable
EntropyCodingMode = 1 # Entropy Coding Mode (0 = CAVLC, 1 = CABAC)
Transform8x8FlagIntra = 1 # 0 = Disable,
# 1 = Enable
Transform8x8FlagInter = 1 # 0 = Disable,
# 1 = Enable
SequenceScalingFlag = 0 # 0 = Disable,
# 1 = Auto,
# 2 = Low,
# 3 = Moderate,
# 4 = Reserved
PerceptualRC = 1 # 1 => Enable Perceptual QP modulation,
# 0 => Disable
EncoderQuality = 1 # 0 => Ver 1.1 mode (Backward compatible),
# 2 => Platinum mode
mvSADout = 0 # 0=>disable mvsad out,
# 1=>enable mvsad out
useARM926Tcm = 1 # 0->do not use arm 926 tcm,
# 1-> use arm 926 tcm
enableROI = 0 # 0->disable ROI
# 1-> enable ROI
mapIMCOPtoDDR = 0 #0->do not use DDR
# 1-> use DDR instead of IMCOP
metaDataGenerateConsume = 0 # 0->Not in use,
# 1-> Generate Meta data,
# 2-> Use Metadata generated by other encoder.
sliceMode = 0 # 0 -> no multiple slices,
# 1 -> Reserved,
# 2 -> multiple slices-MBs/slice,
# 3 -> multiple slices - Rows/slice
outputDataMode = 1 # 0 -> low latency, encoded streams produced
# after N (configurable) slices encode,
# 1 -> encoded stream produce at the end of frame
sliceFormat = 1 # 0-> encoded stream in NAL unit format,
#1 -> encoded stream in bytes stream format
####################################################
Loop filter parameters
####################################################
LoopFilterDisable = 0 # Disable loop filter in slice header
0=Filter,