Texas Instruments DLP4710EVM-LC, User Manual

Page: 9 / 15

www.ti.com
Connectors, Headers, and Switch Description
9 DLPU079A – February 2019 – Revised July 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Using the DLP4710EVM-LC Light Control Evaluation Module
7 Connectors, Headers, and Switch Description
Table 3. DLP4710 Light Control EVM Installed Connectors
Connector Name Description
J7 PWER_SEL Header for voltage level selection for Trigger-IN/OUT
J8 M_3DR Connector for selecting 3DR signal usage (Display or Light Control) for DLPC3479 Master
J9 S_3DR Connector for selecting 3DR signal usage (Display or Light Control) for DLPC3479 Slave
J11 I2C Connector for the I2C interface (DeVaSys USB-I2C/IO board)
J18 HDMI Connector for HDMI input
J21 SPI External SPI Programming interface connector
J22 DMD CNNT Connector for DMD Flex Cable
J23 Spy-Bi-Wire MSP430 Spy-Bi-Wire Programming interface connector
J24 WPC Reserved
J26 Color Sensor Reserved
J28 PWR_IN Connector for 19 V DC power
J32 Fan1 Connector for 12 V Fan
J33 Fan2 Connector for 12 V Fan
J34 MSP_JTAG MSP430 JTAG Programming interface connector
J35 SPI_SEL Header to select Master/Slave SPI flash for external SPI Programming interface
J36 TSTPT Header for remaining DLPC3479 test points (not used)
J40 RED Connector for RED LED cable
J41 GREEN Connector for GREEN LED cable
J42 BLUE Connector for BLUE LED cable
J43 Fan3 Connector for 12 V Fan
J45 TEMP Reserved
J47 Mini_USB Connector for Cypress USB controller
J48 TRIG Connector for Trigger In and Trigger Out for Light Control Application
SW21 ON/OFF Projector ON/OFF Switch
SW28 PS_ON/OFF Power Supply ON/OFF Switch