4.2.4 Commands
The commands page allows users to read/write settings in a grouped format. To read the currently set values,
click the
Get
button. For commands that enable writes, update the command fields, then click the
Set
button for
the values to immediately take effect.
Figure 4-14. DLP Composer - Commands
4.3 MSP430 Example Code
When power is applied to the system, the FPGA configuration is loaded to the FPGA. Depending on the default
configuration, the FPGA begins loading bit-planes to the DMD and sequencing the LED enables for each bit
plane loaded. Alternatively, a microcontroller such as the MSP430G2553-Q1 on the EVM, can issue commands
to the FPGA via SPI to enable video playback, change videos, read DMD temperature via the TMP411, or adjust
current levels to the LEDs. The
MSP430 Example Code
) is a Code Composer Studio example project
available for users to edit and refer to for a custom
Local Host Control
operation mode implementation.
Software
DLPU106A – MARCH 2021 – REVISED OCTOBER 2021
DLP3021LEQ1EVM Evaluation Module
25
Copyright © 2021 Texas Instruments Incorporated