Texas Instruments DLP3010, User Manual, Page: 10 / 13

EVM Setup
www.ti.com
10 DLPU070B – July 2018 – Revised February 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
DLP3010 Light Control EVM User’s Guide
Figure 6. DLP3010 Light Control Connections
The LED adapter board connects the three LEDs with the LED connector on the DLP3010 Light Control
Display board. The different connectors for each LED are named on the board as well as on the light
engine. Refer to
Figure 7 to see the proper setup. The LEDs are connected accordingly to the LED
datasheet specification.
Ensure a good connection of the flex cable to the DLP Light Control Display board before turning it on.
Figure 7. LED Connection
Figure 8 shows the final setup of all parts.