Texas Instruments DLP LightCrafter Display 4710 EVM, User Manual

Page: 8 / 11

Applicable Documents
www.ti.com
8 DLPU034C – June 2015 – Revised November 2016
Submit Documentation Feedback
Copyright © 2015–2016, Texas Instruments Incorporated
DLP
®
LightCrafter™ Display 4710 EVM User’s Guide
Figure 5. LED Connection
Figure 6 shows the final setup of all parts.
Figure 6. DLP LightCrafter Display 4710 EVM
NOTE: Make sure that everything is setup correctly before continuing. Verify that the flex cable is
connected correctly to the LightCrafter Display 4710 board.
7 Applicable Documents
The following documents are applicable to the DLP LightCrafter Display 4710 EVM and are available at
www.ti.com .
• DLP4710 (.47 1080p) DMD data sheet, DLPS056
• DLPC3439 controller data sheet, DLPS057
• DLPA3005 PMIC data sheet, DLPS055
• DLPC3439 Software Programmer's Guide , DLPU035
• DLP LightCrafter Display EVM GUI Tool User's Guide , DLPU021
If you need assistance, refer to the DLP and MEMS TI E2E community support forums .