Texas Instruments DLP LightCrafter Display 3310, User Manual

Page: 13 / 16

Mini-HDMI
Connector
Mini-USB
Connector
DLP LightCrafter
TM
Display Board
Connector
Projector
ON/OFF Switch
19V Power
Input
Connector
5V Fan Power
Connectors
13 DLPU063 – January 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
EVM Setup
Chapter 8
DLPU063 – January 2018
EVM Setup
The DLP LightCrafter Display 3310 EVM is composed of three parts:
• System board
• DLP LightCrafter Display board
• Engine with LED connections and Flex cables
The system board contains the connector for the power supply, a USB connector to communicate to the
DLP LightCrafter Display software, HDMI, and the connector for the DLP LightCrafter Display board. The
system board also contains a switch to turn on the projector in case the DLP LightCrafter Display board
and the engine are connected.
Figure 8-1 shows the main connectors on the system board.
Figure 8-1. DLP LightCrafter Display System Board