Texas Instruments DLP LightCrafter 6500, User Manual, Page: 52 / 60

52 DLPU028C – October 2014 – Revised November 2016
Submit Documentation Feedback
Copyright © 2014–2016, Texas Instruments Incorporated
Connectors
Chapter 4
DLPU028C – October 2014 – Revised November 2016
Connectors
This chapter describes the connector pins of the DLP LightCrafter 6500 and 9000 Module.
4.1 Input Trigger Connectors
The input trigger connector J20 on the DLP LightCrafter 6500 and J23 on the DLP LightCrafter 9000 pins
are listed in
Table 4-1 . The trigger inputs have hysteresis. Two matching six-pin, 1.25-mm connector part
numbers are:
• Molex part number: 51021-0600
• Digi-Key part number: WM1724-ND
The corresponding connector terminal (crimp) part numbers are:
• Molex part number: 50079-8100
• Digi-Key part number: WM2023-ND
Table 4-1. Trigger Input Connector Pins
Description Pin Supply Range
Trigger In 1 Supply 1
External or internal 1.8-V
and 3.3-V.
Trigger In 1 2
Ground 3 Ground
Trigger In 2 Supply 4
External or internal 1.8-V
and 3.3-V.
Trigger In 2 5
Ground 6 Ground
4.2 Output Trigger Connectors
The output trigger connector J24 on the DLP LightCrafter 6500 and J27 on the DLP LightCrafter 9000 pins
are listed in
Table 4-2 . Two matching six-pin, 1.25-mm connector part numbers are:
• Molex part number: 51021-0600
• Digi-Key part number: WM1724-ND
The corresponding connector terminal (crimp) part numbers are:
• Molex part number: 50079-8100
• Digi-Key part number: WM2023-ND
Table 4-2. Trigger Output Connector Pins
Description Pin Supply Range
Trigger Out 1 Supply 1
External or internal 1.8-V
and 3.3-V.
Trigger Out 1 2
Ground 3 Ground
Trigger Out 2 Supply 4
External or internal 1.8-V
and 3.3-V.
Trigger Out 2 5
Ground 6 Ground