Texas Instruments DCA1000EVM, Quick Start Manual, Page: 3 / 6

www.ti.com
Getting Started
3 SPRUIK7 – May 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
DCA1000EVM Quick Start Guide
3. Select the static IP address in the PC local area network properties, as shown in Figure 3 .
Figure 3. Configure Static IP Address on the PC
4. Download and install the mmWave Studio tool from the following link: http://www.ti.com/tool/MMWAVE-
STUDIO . Install the Matlab Runtime Engine from here .
5. When the EVMs are powered and connected to the PC, install the FTDI drivers available from the
mmWave Studio installer package. For details on the FTDI driver installation, refer to the mmWave
Studio User Guide .
6. The device manager shows the COM ports, as shown in Figure 4 . The RS232 COM port is shown as
XDS110 Class Application/User UART.
Figure 4. COM Ports