Texas Instruments DAC63204EVM, User Manual, Page: 13 / 25

3.2.2.1.3 Functions Generation Subpage
The Function Generation subpage, as shown in Figure 3-7 , provides control of the relevant register settings
for function generation This subpage provides the ramp programming done through the Code Step and Slew
Rate drop-down menu settings. The DAC waveform drop-down menu selects the waveform to be generated:
triangular, saw-tooth, inverse saw-tooth, square, or sine. The Margin High Code and Margin Low Code settings
define the upper and lower bounds of the waveform, respectively. The Start Function Gen checkboxes start or
stop the defined function generation for each channel. The register settings can be programmed or retrieved
using the
Program NVM or Reload NVM checkboxes, respectively.
Figure 3-7. Function Generation Subpage
www.ti.com Detailed Description
SLAU866 – NOVEMBER 2021
Submit Document Feedback
DAC63204EVM User's Guide 13
Copyright © 2021 Texas Instruments Incorporated