Program file and USB-controller
driver are in same location
www.ti.com
Installing the EVM Control Software and USB Driver
Connect the USB cable to the EVM. If a box appears asking for an appropriate driver,
Do not use the
automatic search option!
Select a manual installation and when prompted for the driver location browse
to the CDCE62005EVM program file folder that was used during instillation. If Windows does not ask for a
driver, no action is needed.
After USB driver installation, the EVM software should connect properly and be ready for use. A green
light in the USB Status and SPI Bus Status boxes indicates a good USB connection, and a dark light
indicates a faulty USB connection or a faulty SPI bus.
SCAU024 – September 2008
Low Phase Noise Clock Evaluation Module — up to 1.5 GHz
3