Texas Instruments CC3200MODLAUNCHXL, User Manual

Page: 20 / 27

Software Examples
www.ti.com
3 Software Examples
3.1 Development Environment Requirements
Using any of the following software examples with the LaunchPad requires an integrated development
environment (IDE) that supports the CC3200 device.
For more details on where to download the latest IDE, see Section 4.3 .
The CC3200 Programmer's guide ( SWRU369 ) has detailed information on software environment setup,
with examples.Refer to this document for further details on the software sample examples.
3.1.1 CCS
CCS 6.0 or higher is required. When CCS has been launched and a workspace directory chosen, use
Project → Import Existing CCS Eclipse Project . Direct it to the desired demo’s project directory containing
main.c.
3.1.2 IAR
IAR 6.70 or higher is required. To open the demo in IAR, choose File → Open → Workspace… , and direct
it to the *.eww workspace file inside the \IAR subdirectory of the desired demo. All workspace information
is contained within this file. Additional Resources www.ti.com
The subdirectory also has an *.ewp project file. This file can be opened into an existing workspace using
Project → Add-Existing-Project… .
20 CC3200MOD SimpleLink™ Microcontroller and Wi-Fi® Network Processor SWRU397 – December 2014
Module - LaunchPad Hardware
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated