Hardware Description
Figure 10. Active Current Measurement
2.6
Performing Conducted Testing
By default, the BoosterPack ships with the RF signal connected to the on-board chip antenna.
illustrates a miniature UMC connector (Murata MM8030-2610) on the board's RF path for measuring the
performance in a conducted mode.
In addition to the Murata connector, a U.FL connector on the board (see
) for conducting testing
or to connect an external antenna. This requires a board modification, as illustrated in the figures below.
Figure 11. Connectors on the Board
12
CC3100MOD SimpleLink™ Wi-Fi® Network Processor Module BoosterPack
SWRU396A – December 2014 – Revised September 2015
Hardware
Copyright © 2014–2015, Texas Instruments Incorporated