Z-Stack User's Guide - CC2431ZDK
F8W-2006-0025 Version 1.4.3
1
Copyright
2006-2007 Texas Instruments, Inc. All rights reserved
.
1. Introduction
1.1. Scope
This document accompanies the Texas Instruments Z-Location Z-Stack™ Development kit and
is essentially the same as the document that accompanies the basic Texas Instruments Z-Stack
Development kit: The Z-Stack User’s Guide – CC2430ZDK. The primary difference is that this
document uses Z-Location as the sample application. Z-Location is a sophisticated radio location
solution built on top of Z-Stack, conforming to ZigBee Alliance standards (
www.zigbee.org
).
1.2. Scope
The CC2430EM and the CC2431EM are interchangeable, except that a device intended to run as
a Blind Node must be fitted with the CC2431EM.
2. Product Package Description
2.1. Installation Package Contents
The downloaded Z-Stack installation package contains all of the documentation and software
required to install, configure, and develop applications using Z-Stack. The package employs a
Microsoft Windows-based installation application which guides the installation process.
2.2. Development Boards
There are two Chipcon SmartRF04EB evaluation boards, each to be fitted with a CC243xEM
evaluation module.
Figure 1: Chipcon SmartRF04EB with CC243xEM
