BUF18830EVM Software
15
SBOU103A – April 2011 – Revised May 2016
Copyright © 2011–2016, Texas Instruments Incorporated
BUF18830EVM User Guide and Software Tutorial
After the installation process initializes, the user is given the choice of selecting the directory in which to
install the program; the default location is
C:\Program Files\BUF18830\
and
C:\Program Files\National
Instruments\
. Following this option, two license agreements are presented that must be accepted, as
shown in
. After accepting the Texas Instruments and National Instruments license agreements,
the progress bar opens and shows the installation of the software, as
illustrates. Once the
installation process is completed, click
Finish
.
Figure 11. BUF18830EVM License Agreements
Figure 12. BUF18830EVM Software Installation Progress
2.3
Software Description and Set-Up
The BUF18830EVM software allows the user to read and write to all registers in the BUF18830 gamma
correction buffer. Furthermore, it allows programming of the OTP register on the BUF18830. The software
also permits the user to select either I
2
C address. Press the
About
button, as shown in
, to verify
that you have the latest version of the software.
Figure 13. BUF18830EVM Software About Button
