Texas Instruments BUF08832, User Manual, Page: 5 / 32

BUF08832
T4
T5
I C A0 Address
Jumper
2
I C
Interface
2
V Supply
(V Power Supply)
DUT
SD
25-Pin
Male DSUB Signals
from USB Dig Platform
External BUF08832
Analog Power Supply
Output Channels
www.ti.com
BUF08832EVM Hardware Setup
2.1 Theory of Operation for BUF08832_Test_Board Hardware
Figure 3 presents a block diagram of the BUF08832_Test_Board. The functionality of this PCB is relatively
simple. It provides connections to the I
2
C™ interface and general-purpose input/outputs (GPIO) on the
USB DIG Platform board. It also provides connection points for external connections of the shunt voltage,
bus voltage, and GND.
Figure 3. BUF08832_Test_Board Block Diagram
5 SBOU081 – November 2009 BUF08832EVM User Guide and Software Tutorial
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated