Texas Instruments BQ77207, User Manual

Page: 7 / 19

3.4 Hardware Configuration
3.4.1 Unused Components
The EVM contains a few component patterns which are not used. RT1 is installed as the thermistor. If RT1 is
removed, an alternate may be installed at the R9 pattern or a through-hole thermistor may be installed at RT2.
With an appropriate part a suitable PTC could be installed at either pattern. See the schematic in
Figure 4-7 .
www.ti.com BQ77207 Circuit Module Use
SLUUCI0 – OCTOBER 2021
Submit Document Feedback
BQ77207 Evaluation Module 7
Copyright © 2021 Texas Instruments Incorporated