Texas Instruments bq51013AEVM-765, User Manual, Page: 2 / 21

Applications
www.ti.com
List of Tables
1 bq51013AEVM-765 Electrical Performance Specifications
...........................................................
2
2 Bill of Materials
..............................................................................................................
6
1 Applications
The bq51013AEVM-765 evaluation module (EVM) demonstrates the receiver portion of the bqTESLA™
wireless power system. This receiver EVM is a complete receiver-side solution that produces 5 V out at up
to 1 A when coupled with the bqTESLA™ transmitter. The bq51013AEVM-765 device shown on this EVM
along with external components that support the device for a complete solution.
• The bqTESLA™ receiver can be used in any number of low-power battery portable devices as a power
source for charging. With contact-free charging capability, no connections to the device are needed.
• Output voltage of 5 V up to 1 A
• External adapter switchover and control circuit
• Low-profile, external pick-up coil
• Frame is configured to provide correct receiver to transmitter spacing.
• Room above coil for testing with battery, key for tuning
• Adjustable resistor R16 can be used to set max output current
2 bq51013AEVM-765 Electrical Performance Specifications
Table 1 provides a summary of the bq51013AEVM-765 performance specifications. All specifications are
given for an ambient temperature of 25°C.
Table 1. bq51013AEVM-765 Electrical Performance Specifications
Parameter Notes and Conditions Min Typ Max Unit
INPUT CHARACTERISTICS
V
IN
Input Voltage Typical V-rectified voltage at TP12 4 5.5 8 V
V
ADAPTER
Adapter Input Voltage 4 7 20 V
Input Overvoltage Voltage at V-rectified 15 V
OVP
Protection
OUTPUT CHARACTERISTICS
V
OUT
V J3 to J4 5 V
I
OUT
I J3 1 A
SYSTEMS CHARACTERISTICS
F
S
Switching Frequency 110 205 kHz
Eff Efficiency Output current 500 mA 74 %
3 Modifications
See the data sheet ( SLUSAY6 ) when changing components. To aid in such customization of the EVM, the
board was designed with devices having 0603 or larger footprints. A real implementation likely occupies
less total board space.
Note that changing components can improve or degrade EVM performance.
4 Connector and Test Point Descriptions
4.1 Input/Output Connections
The connections points are described in the following paragraphs.
2 bq51013AEVM-765 Evaluation Module SLUU911 – June 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated