Texas Instruments bq50002AEVM-607, User Manual, Page: 3 / 25

www.ti.com
Modifications
3 SLUUBJ2 – October 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
bq50002A Wireless Power TX EVM
3 Modifications
See the datasheet for bq50002A ( SLUSBW1 ) or bq500511A ( SLUSCN3 ) when changing components.
FOD – R27 threshold and R26 FOD_Cal (see Section 6.3.8 )
4 Connector and Test Point Descriptions
4.1 Input/Output Connections
The connection points are described in Section 4.1.1 through Section 4.1.4 .
4.1.1 J1 – V
IN
Input power 5 V ±500 mV, return at J3.
4.1.2 J2 – USB Input
USB input connection.
4.1.3 J3 –GND
Return for input power, input at J1.
4.1.4 J4 – Serial Interface
I
2
C interface connection to communicate with the IC. Used with bqStudio tool to monitor behavior