Texas Instruments bq50002AEVM-607 User Manual Download

Page: 1 / 25

SLUUBJ2 – October 2016

Submit Documentation Feedback

bq50002A Wireless Power TX EVM

bqTESLA is a trademark of Texas Instruments.
Avid is a registered trademark of Avid Technology, Inc..

User's Guide

SLUUBJ2 – October 2016

bq50002A Wireless Power TX EVM

The bqTESLA™ wireless power transmitter evaluation module from Texas Instruments is a high-
performance, easy-to-use development module for the design of wireless power solutions. The bq50002A
evaluation module (EVM) provides all the basic functions of a Qi-compliant, wireless charger pad. The 5-V
input, single coil transmitter enables designers to speed the development of their end-applications. The
EVM supports both the Qi WPC 1.0, WPC 1.1, and WPC 1.2 receivers and will support output power up to
5 W.

Contents

Applications

...................................................................................................................

bq50002AEVM-607 Electrical Performance Specifications

............................................................

Modifications

..................................................................................................................

Connector and Test Point Descriptions

...................................................................................

4.1

Input/Output Connections

..........................................................................................

4.2

Test Point Descriptions

............................................................................................

Schematic and Bill of Materials

............................................................................................

Test Setup

...................................................................................................................

6.1

Equipment

..........................................................................................................

6.2

Equipment Setup

..................................................................................................

6.3

EVM Procedure

....................................................................................................

C Interface and bqStudio

................................................................................................

7.1

EV2400 Set Up

....................................................................................................

7.2

bqStudio

............................................................................................................

bq50002AEVM-607 Assembly Drawings and Layout

.................................................................

Reference

...................................................................................................................

List of Figures

bq50002AEVM-607 Schematic

............................................................................................

Efficiency vs Power, bq50002AEVM-607 TX and bq51013BEVM-764 Receiver

..................................

Start Up

......................................................................................................................

Thermal Performance

......................................................................................................

Connections of the EV2400 kit

...........................................................................................

bqStudio Window

...........................................................................................................

Assembly Top

...............................................................................................................

Inner Layer 1

................................................................................................................

Inner Layer 2

................................................................................................................

Bottom Layer

................................................................................................................

List of Tables

bq50002AEVM-607 Electrical Performance Specifications

............................................................

Bill of Materials

...............................................................................................................

Summary of Contents for bq50002AEVM-607


























Search results

Summary of Contents for bq50002AEVM-607

Reviews:

Related manuals for bq50002AEVM-607

Brands by name

Popular brands

Texas Instruments bq50002AEVM-607, User Manual

Search results

Summary of Contents for bq50002AEVM-607

Reviews:

Related manuals for bq50002AEVM-607

Brands by name

Popular brands