Texas Instruments bq50002, User Manual

Page: 3 / 25

www.ti.com
Modifications
3 Modifications
See the datasheet ( SLUSBW1 ) when changing components.
FOD – R27 threshold and R26 FOD_Cal (see Section 6.3.9 )
4 Connector and Test Point Descriptions
4.1 Input/Output Connections
The connection points are described in Section 4.1.1 through Section 4.1.4 .
4.1.1 J1 – V
IN
Input power 5 V ±500 mV, return at J3.
4.1.2 J2 – USB Input
USB input connection.
4.1.3 J3 –GND
Return for input power, input at J1.
4.1.4 J4 – Serial Interface
I
2
C interface connection to communicate with the IC. Used with bqStudio tool to monitor behavior
3 SLVUAJ7 – October 2015 bq50002 Wireless Power TX EVM
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated