www.ti.com
1
Introduction
1.1
Features
1.2
Kit Contents
1.3
Ordering Information
Introduction
The bq27x10EVM includes one bq27x10EVM circuit module, an EV2300 PC interface board for gas
gauge evaluation, a USB cable, CD ROM including Windows™-based PC software and support
documentation. The circuit module includes one bq27x10, a current sense resistor, and all other
components onboard necessary to calculate remaining battery capacity and predict system run-time to
empty. The circuit module connects directly across the cell in a battery. With the PC interface board and
software, the user can read the bq27x10 data registers, program the on-chip configuration EEPROM, and
evaluate the functions of the bq27x10 under different charge and discharge conditions.
•
Complete evaluation system for the bq27x10 battery gas gauge
•
Populated circuit module for quick setup
•
PC software and interface board for easy evaluation
•
Software allows EEPROM programming and data logging for system analysis
1. bq27x10EVM circuit module with sense resistor
2. PC interface board (EV2300 for USB interface)
3. CD ROM including Windows-based PC software and support documentation
4. USB cable
5. Set of support documentation
Table 1. Ordering Information
EVM PART NUMBER
PC INTERFACE BOARD
CHEMISTRY
PACK VOLTAGE
CAPACITY
bq27x10EVM
USB
Li-Ion
2.6 v to 4.5 V
100 to 2000 mAh
2
bq27x10EVM Single-Cell Battery Fuel Gauge
SLUU259 – October 2006
Evaluation Module
