Battery Management Studio
5
SLUUBP4 – June 2017
Copyright © 2017, Texas Instruments Incorporated
bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module
3
Battery Management Studio
3.1
Starting the Program
Run
Battery Management Studio
from the Start | Programs | Texas Instruments | Battery Management
Studio sequence or the
Battery Management Studio
shortcut. As long as the device has been woken up
from shutdown mode by momentarily pressing button
S1
or applying a charger voltage, the gauge will be
automatically detected and the register screen will appear as seen in
. If your device contains an
earlier firmware version, then auto detection of the device may not occur. If that happens, on the window
that pops up as shown in
, select any bq27750.bqz file. This action will enable the program to get
started and the user can update the firmware using the latest .srec file for the device downloadable from
the product folder of the gauge at
.
Figure 2. Registers Screen
