Texas Instruments BQ25157, Manual

Page: 41 / 110

9.5.1.1 STAT0 Register (Address = 0x0) [reset = X]
STAT0 is shown in Figure 9-16 and described in Table 9-10 .
Return to Summary Table .
Figure 9-16. STAT0 Register
7 6 5 4 3 2 1 0
RESERVED CHRG_CV_ST
AT
CHARGE_DON
E_STAT
IINLIM_ACTIVE
_STAT
VDPPM_ACTIV
E_STAT
VINDPM_ACTI
VE_STAT
THERMREG_A
CTIVE_STAT
VIN_PGOOD_S
TAT
R-X R-X R-X R-X R-X R-X R-X R-X
Table 9-10. STAT0 Register Field Descriptions
Bit Field Type Reset Description
7 RESERVED R X Reserved
6 CHRG_CV_STAT R X Constant Voltage Charging Mode (Taper Mode) Status
1b0 = Not Active
1b1 = Active
5 CHARGE_DONE_STAT R X Charge Done Status
1b0 = Not Active
1b1 = Active
4 IINLIM_ACTIVE_STAT R X Input Current Limit Status
1b0 = Not Active
1b1 = Active
3 VDPPM_ACTIVE_STAT R X DPPM Status
1b0 = Not Active
1b1 = Active
2 VINDPM_ACTIVE_STAT R X VINDPM Status
1b0 = Not Active
1b1 = Active
1 THERMREG_ACTIVE_ST
AT R X Thermal Regulation Status
1b0 = Not Active
1b1 = Active
0 VIN_PGOOD_STAT R X VIN Power Good Status
1b0 = Not Good
1b1 = V
IN
> V
UVLO
and V
IN
> V
BAT
+ V
SLP
and V
IN
< V
OVP
www.ti.com
BQ25157
SLUSEC5 – DECEMBER 2020
Copyright © 2020 Texas Instruments Incorporated Submit Document Feedback 41
Product Folder Links: BQ25157