Test Summary
8
SLUUBC8A – August 2015 – Revised May 2016
Copyright © 2015–2016, Texas Instruments Incorporated
bq2512x Evaluation Module
2.3
Software GUI (When I
2
C Communication is Used)
When using I
2
C communication, implement the following steps with the software GUI:
1. Install the
software GUI.
2. Connect the EV2400 interface board to the EVM (as shown in
.
3. Open Software GUI and go to “Field View” page (as shown in
4. Change the parameters in the pull-down menu or check/uncheck the selection box.
Figure 4. EV2400 Interface Box Connection
Figure 5. bq2512x Software GUI
