Texas Instruments BQ24392EVM, User Manual, Page: 12 / 22

Board Documentation
www.ti.com
4 Board Documentation
This section contains the BOM , the EVM schematic, and the PCB layout drawings.
4.1 Bill of Materials
Table 5 lists the bill of materials for this EVM.
Table 5. bq24392 EVM Bill of Materials
Designator Qty Value Description Package Reference Part Number
C1 1 1uF CAP, CERM, 1uF, 16V, +/-10%, X5R, 0603 0603 C0603C105K4PACTU
C2 1 0.1uF CAP, CERM, 0.1uF, 16V, +/-5%, X7R, 0603 0603 0603YC104JAT2A
C3, C4 2 0.1uF CAP, CERM, 0.1uF, 6.3V, +/-10%, X5R, 0402 0402 C1005X5R0J104K
D1, D2, D3, D4 4 Green LED, Green, SMD LED, GREEN, 0603 SML-LX0603GW-TR
H3, H4, H7, H8 4 Machine Screw, Round, #4-40 x 1/4, Nylon, Screw NY PMS 440 0025 PH
Philips panhead
J1, J5 2 Connector, Receptacle, USB TYPE A, 4POS USB TYPE A 896-43-004-00-000000
SMD CONNECTOR
RECEPTACLE 4POS
SMD
J2, J4 2 Receptacle, Micro-USB-B, Right Angle, SMD Micro USB receptacle 105017-0001
J3 1 Header, TH, 100mil, 3x1, Gold plated, 230 mil 3x1 Header TSW-103-07-G-S
above insulator
R1, R7 2 1.1k RES, 1.1k ohm, 5%, 0.1W, 0603 0603 CRCW06031K10JNEA
R2, R3, R4, R5 4 0 RES, 0 ohm, 5%, 0.063W, 0402 0402 CRCW04020000Z0ED
R6, R8 2 2.80k RES, 2.80k ohm, 1%, 0.1W, 0603 0603 CRCW06032K80FKEA
R9 1 10k RES, 10k ohm, 5%, 0.1W, 0603 0603 CRCW060310K0JNEA
SH-J1 1 1x2 Shunt, 100mil, Gold plated, Black Shunt 969102-0000-DA
TP1_VBUS, TP2_VBUS, 12 Header, TH, 100mil, 1pos, Gold plated, 230 Testpoint TSW-101-07-G-S
TP3_GND, TP4_GND, mil above insulator
TP5_GND, TP6_GND,
TP7_DP, TP8_DM,
TP9_CHG_AL_N,
TP10_SW_OPEN,
TP11_CHG_DET,
TP12_GOOD_BAT
U1 1 Charger Detection Device with High Speed RSE0010A BQ24392RSE
USB Switch Battery Charger Specification
v1.2, RSE0010A
U2 1 TLV7133PDBV IC, 150mA, Low IQ, Ultra Small LDO Voltage SOT TLV7133PDBV
Reg.
12 BQ24392EVM User's Guide SLVUA61 – April 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated