5
SPRUI90 – September 2016
Copyright © 2016, Texas Instruments Incorporated
TMS320C5545 BoosterPack Hardware
BoosterPack, LaunchPad, MSP430, SimpleLink, Code Composer Studio are trademarks of Texas Instruments.
ARM, Cortex are registered trademarks of ARM Limited.
Bluetooth
is a trademark of Bluetooth SIG, Inc.
ZigBee is a registered trademark of ZigBee Alliance.
All other trademarks are the property of their respective owners.
User's Guide
SPRUI90 – September 2016
TMS320C5545 BoosterPack Hardware
This user's guide supports the C5545 BoosterPack™, which was designed and developed by Mistral
Solutions Pvt. Ltd. for Texas Instruments, Inc.
1
Overview
This section provides an overview of the C5545 BoosterPack along with the key features, functional block
diagram and basic operation.
1.1
Key Features
The C5545 BoosterPack is a high performance, low-power platform that enables users to evaluate and
develop for the TMS320C5545A processor and its peripherals. The BoosterPack interfaces to
LaunchPad™ boards such as MSP432, CC3200, MSP430™ LaunchPads, as well as compatible
BoosterPacks.
The key features of C5545 BoosterPack are:
•
The C5545 fixed-point DSP based on TI’s C55x architecture
•
The CC2650 2.4 GHz multi-standard wireless MCU
–
Used as wireless communication companion with C5545 DSP
•
2.4 GHz single ended PCB antenna
•
16M-bit SPI FLASH
•
Micro-SD card slot with 8GB card
•
OLED display (passive matrix, 96 x 16 pixels, monochrome display)
•
Audio CODEC (TLV320AIC3206IRSBT)
•
Micro USB connector
•
Three user switches and three user LEDs
•
One reset switch and two power LEDs
•
FTDI chip FT2232HL for JTAG and UART over micro USB connector
•
10-pin JTAG for CC2650 (1.8 V only)
•
Audio line-in (MIC) and headphone out
•
On-board microphone (CMC-2242PBL-A)
•
LaunchPad connectors
•
INA current monitors (INA219AIDCNR)
•
Powered by USB or LaunchPad
•
On-board, XDS100 JTAG emulator for C5545