Texas Instruments AWR1843AOP EVM, User Manual, Page: 21 / 29

2.9.1 Modular Mode
When used in Modular mode, the UART can either be routed to the SICP2015, which displays the data on the
mmWave visualizer, or to other devices connected to the USB interface. The UART data can also be routed to
the CC2642R2F, which transmits data to a wireless device through Bluetooth.
Figure 2-20 shows the setup for
SICP2015. Figure 2-21 shows the setup for CC2642R2F.
1
Figure 2-20. Switch Configuration for Modular Mode (Functional)
Figure 2-21. Switch Configuration for Bluetooth Mode (Functional)
1
For higher power application ensure the USB J1 is connected before connecting USB J5.
www.ti.com Hardware
SPRUIX8 – MARCH 2021
Submit Document Feedback
AWR1843AoP EVM User’s Guide 21
Copyright © 2021 Texas Instruments Incorporated