AMC7812EVM Software Overview
Figure 12. ADC Page
To completely activate the ADC block, the
Enable Reference Block
must be enabled, along with the
Enable Internal Reference Buffer
and
Power ADC Block
.
shows this sequence.
Figure 13. ADC Block Activation Sequence
After the device is configured, individual channels can be enabled by selecting their respective
ADC MUX
button, as shown in
.
Figure 14. ADC Channel MUX
CH0 to CH3 can be selected by using the dropdown menu and choosing various options such as
differential mode, single-ended mode, and so forth, as shown in
Figure 15. ADC CH0 to CH3 Config
15
SBAU177D – September 2010 – Revised August 2014
AMC7812EVM-PDK User’s Guide
Copyright © 2010–2014, Texas Instruments Incorporated
