Layout, BOM, and Schematic
5
SBAU256 – May 2016
Copyright © 2016, Texas Instruments Incorporated
AMC1301 Evaluation Module
An analog input signal may be applied directly at screw terminal J2. Refer to
and
for
details. The differential analog input range, (VIN+) – (VIN–), is specified at ±250 mV with a maximum of
±320 mV before clipping occurs.
The analog output has a nominal gain of 8 through the AMC1301 isolation amplifier. With an input voltage
of ±250 mV, the nominal output is therefore ±2.0 V. The output voltage is centered on VDD / 2 and
provides a convenient analog input range to the embedded analog-to-digital converters (ADCs) of the
and
series of digital processors.
5
Layout, BOM, and Schematic
This sections contains the PCB layout,
, and
of the AMC1301 EVM.
5.1
Layout
shows the AMC1301 PCB layout.
NOTE:
Board layout is not to scale. This figure is intended to show how the board is laid out; it is not
intended to be used for manufacturing AMC1301EVM PCBs.
Figure 5. AMC1301 Silkscreen Drawing
