Texas Instruments AIC111EVM, User Manual, Page: 11 / 23

2-1 Digital Interface
Digital Interface
The digital signals required to operate this codec originate from the 40-pin con-
nector – J1. There are two methods to drive the digital interface:
-
Create a custom interface between the codec EVM and the host system.
-
Alternatively, if a TI DSK (DSP starter kit) is the host system, a develop-
ment platform is available from TI. This platform provides the additional
functions that the codec requires in a convenient form factor.
Topic Page
2.1 Codec-to-Platform 2-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Jumper Options 2-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2