background image

3.2.2.4 Register Map Page

The AFE539A4EVM 

Register Map

 page, shown in 

Figure 3-8

, allows access to low-level communication directly 

with the AFE539A4 registers. Selecting a register on the 

Register Map

 list shows a description of the values 

in that register, as well as information on the register address, default value, size, and current value. Data are 
written to the registers by entering a value in the value column or by selecting bits in the bit field of the GUI.

Figure 3-8. Register Map Page

The values of the register map can be stored locally by selecting 

Save Registers

 under the 

File

 menu option. 

The stored configuration files can be recalled and loaded by selecting 

Load Registers

.

Figure 3-9

 shows the four configuration buttons, 

Read Register

Read All Registers

Write Register

, and 

Write All 

Registers

, provided on the 

Register Map

 page that allow the user to read from and write to the device registers. 

The 

Write Register

 and 

Write All Registers

 buttons are enabled only in 

Deferred

 update mode. 

Deferred

 mode 

initiates a write operation only when the 

Write Register

 or the 

Write All Registers

 button is pressed. By default, 

Immediate

 update mode is selected for the 

Register Map

 page write operations.

Figure 3-9. Register Page Options

www.ti.com

Detailed Description

SLAU859 – JULY 2021

Submit Document Feedback

AFE539A4EVM

17

Copyright © 2021 Texas Instruments Incorporated

Summary of Contents for AFE539A4EVM



























Reviews: