1 Overview
The ADS9817EVM-PDK is a platform for evaluating the performance of the ADS9817 SAR ADC, which is a
±2.5-V, ±5-V, ±10-V, and ±12-V, single-ended input, 18-bit, 2-MSPS/Ch device. The evaluation kit includes the
ADS9817EVM board and an FMC connecter adapter board used to interface the ADC with many FPGA kits. The
(sold separately) is a digital controller board that can be used with this evaluation kit and the
EVM software GUI to communicate with the device, graph measured results, and compute common figures of
merit (such as SNR and THD).
The following related documents are available for download through the Texas Instruments web site at
Table 1-1. Related Documentation
Device
Literature Number
1.1 ADS9817EVM-PDK Features
The ADS9817EVM-PDK includes the following features:
• Hardware and software required for diagnostic testing and accurate performance evaluation of the ADS9817
ADC
• The FMC connecter adapter board, as shown in
, facilitates connection to common FPGA kits
• The
controller (sold separately) requires a separate 5-V, 2-A power source; the
ADS9817EVM requires a separate 5.5-V, 1-A power source
• The TSWDC155EVM controller (sold separately) provides a convenient communication interface (see
) to the ADS9817 ADC over USB 3.0 (or higher) for power delivery and for digital inputs and outputs
• Easy-to-use evaluation software (no cost) for Microsoft
®
Windows
®
10, 64-bit operating systems requires the
TSWDC155EVM (sold separately) for operation
• The software suite (no cost) includes graphical tools for data capture, histogram analysis, spectral analysis,
SNR, and THD
•
depicts the connections and basic subsystems of the EVM
Included in kit
ADS9817EVM
FMCtoVITA57
Not provided
by Texas
Instruments
Your custom
so
ware
FPGA Kit
5.2V to 5.5V
DC power
Signal
Source
Signal
Source
Figure 1-1. System Using FMC to VITA57 and FPGA Kit
Overview
SBAU416 – NOVEMBER 2022
ADS9817EVM-PDK Evaluation Module
3
Copyright © 2022 Texas Instruments Incorporated