Texas Instruments ADS9224REVM-PDK, User Manual, Page: 13 / 34

LED D2 LED D1
LED D5
www.ti.com
Operation
13 SBAU315A – July 2018 – Revised June 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
ADS9224REVM-PDK
6 Operation
The following instructions are a step-by-step guide to connecting the ADS9224REVM-PDK to the
computer and evaluating the performance of the ADS9224R:
1. Connect the ADS9224REVM to the PHI, and install the two screws, as indicated in Figure 8 .
2. Use the provided USB cable to connect the PHI to the computer.
• LED D5 on the PHI lights up, indicating that the PHI is powered up.
• LEDs D1 and D2 on the PHI start blinking to indicate that the PHI is booted up and communicating
with the PC.
Figure 8. EVM-PDK Hardware Setup and LED Indicators
3. Double-click on the ADS92x4R EVM.exe , file to launch the ADS9224REVM-PDK GUI software.
Figure 9 shows the ADS9224REVM software folder.
Figure 9. Launch the EVM GUI Software