Texas Instruments ADS7861 EVM, User Manual, Page: 14 / 20

Additional Control Options
3-2
3.1 Additional Control Options
The following table shows the pin-out of header J5. This dual row, four-position
header provides additional control functionality to the ADS7861/8361 EVM.
Signals A0, M0, and M1 are configured with pull-up resistors by default. The
jumper shunts supplied with the EVM can be used to set these signals to logic
low. These signals can also be connected to control signals in the users
system.
Table 3–2. Header J5 Description
Pin Number Signal Description
J5.1 M0 Selects two-channel or four-channel mode
J5.3 M1 Selects between serial outputs A and B
J5.5 A0 Operates in conjunction with M0. See data sheet
for details.
J5.7 OUT B B channel secondary output
J5.2 – J5.8 (even) DGND Digital ground connections