Texas Instruments ADS7854EVM-PDK, User Manual, Page: 25 / 35

www.ti.com
Bill of Materials, PCB Layout, and Schematics
7 Bill of Materials, PCB Layout, and Schematics
Section 7.1 lists the bill of materials. Section 7.2 shows the printed circuit board (PCB) layout for the
ADSxx54EVM. The schematics for the ADSxx54EVM are appended to the end of this user's guide.
7.1 Bill of Materials
NOTE: All components should be compliant with the European Union Restriction on Use of
Hazardous Substances (RoHS) Directive. Some part numbers may be either leaded or
RoHS. Verify that purchased components are RoHS-compliant.
Table 7. ADSxx54EVM Bill of Materials
Item No. Qty Ref Des Description Vendor Part Number
C1, C10, C32, C39,
Capacitor, Ceramic, 10uF, 16V, +/-10%,
1 11 C41, C42, C43, Murata GRM21BR61C106KE15L
X5R, 0805
C44, C45, C46, C54
C5, C6, C9, C17,
Capacitor, Ceramic, 1uF, 6.3V, +/-10%,
2 9 C18, C33, C35, Murata GRM188R70J105KA01D
X7R, 0603
C36, C40
Capacitor, Ceramic, 10uF, 6.3V, +/-20%,
3 4 C7, C14, C23, C51 TDK C1608X5R0J106M
X5R, 0603
C8, C11, C15, C16,
Capacitor, Ceramic, 0.1uF, 16V, +/-5%,
4 10 C19, C34, C37, AVX 0603YC104JAT2A
X7R, 0603
C48, C52, C53
Capacitor, Ceramic, 4700pF, 25V, +/-5%,
5 2 C22, C38 AVX 08053A472JAT2A
C0G/NP0, 0805
2 Capacitor, Ceramic, 2.2uF, 16V, +/-10%,
6 C47, C50 Murata GRM188R61C225KE15D
X5R, 0603
Capacitor, Ceramic, 0.22uF, 16V, +/-
7 1 C49 TDK GRM188R61C224KA88D
10%, X5R, 0603
C26, C27, C28,
8 0 Not Install: Capacitor, C0603 N/A Not Install
C29, C31
NXP
9 1 D1 DIODE ZENER 5.9V 250MW SOT23 PLVA659A.215
Semiconductors
10 4 J1, J2, J3, J4 Connector, TH, SMA TE Connectivity 142-0701-201
On Shore
11 1 J5 2 Terminal Block 3.5MM 2POS PCB) ED555/2DS
Technology Inc
SAMTEC, dual-row, right-angle, female,
12 1 J6 Samtec ERF8-025-01-L-D-RA-L-TR
latching
13 0 J7 Not Install: Connector for microSD card Molex Not Install (MOLEX 502570-0893)
JP1, JP2, JP3, JP4,
Header, TH, 100mil, 2x1, Gold plated,
14 9 JP5, JP6, JP7, JP8, Samtec TSW-102-07-G-S
230 mil above insulator
JP9
Header, TH, 100mil, 3x1, Gold plated,
15 1 JP10 Samtec TSW-103-07-G-S
230 mil above insulator)
R1, R2, R3, R10,
16 8 Resistor, 47.0 ohm, 1%, 0.1W, 0603 Yageo RC0603FR-0747RL
R13, R31, R33, R47
17 2 R5, R86 Resistor, 100k ohm, 5%, 0.1W, 0603 Vishay Dale CRCW0603100KJNEA
Panasonic
18 3 R6, R46, R63 RES, 0.22 ohm, 1%, 0.1W, 0603 ERJ-3RQFR22V
Electronic
'R7, R15, R18, R19,
Panasonic
19 10 R20, R43, R50, RES 1K OHM 1/10W .1% 0603 SMD ERA-3AEB102V
Electronic
R53, R54, R55
R9, R16, R17, R24,
R26, R27, R34,
20 14 RES, 0 ohm, 5%, 0.1W, 0603 Vishay Dale CRCW060320K0FKEA
R35, R44, R51,
R52, R62, R89, R90
21 4 R11, R12, R45, R48 RES, 20.0k ohm, 1%, 0.1W, 0603 Vishay Dale CRCW060320K0FKEA
22 3 R14, R49, R58 RES, 100 ohm, 1%, 0.1W, 0603 Yageo RC0603FR-07100RL
23 4 R21, R22, R56, R57 RES, 10.0 ohm, 1%, 0.1W, 06033 Vishay Dale CRCW060310R0FKEA
'R70, R71, R72,
24 7 RES, 10k ohm, 5%, 0.063W, 0402 Vishay Dale CRCW040210K0JNED
R73, R74, R75, R76
25 SBAU209 – April 2014 ADS8354EVM-PDK and ADS7854EVM-PDK
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated