ADSxx53EVM-PDK Kit Operation
While using the EVM-PDK hardware for data acquisition, keep the GUI in the
Capture Mode: SDCC
interface
mode of operation. The GUI indicates the selected mode of operation on the top-right corner of
the GUI display. In order to select the hardware interface mode of operation, navigate to the
GUI Settings
page and select the
SDCC Interface
option on the
Capture Mode
drop-down menu, as shown in
and
.
Figure 30. Open the GUI Settings Page
Figure 31. Set Capture Mode to SDCC Interface While Using the EVM Hardware
28
ADS8353EVM-PDK and ADS7853EVM-PDK
SBAU210A – June 2014 – Revised August 2014
Copyright © 2014, Texas Instruments Incorporated