Texas Instruments ADS58J64 EVM, User Manual, Page: 17 / 20

www.ti.com
Connector Descriptions
17 SBAU284 – January 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
Table 8. Jumper and Button Descriptions and Default Settings (continued)
Jumper Description Default Setting
TRDYCD
Trigger Ready output for Burst Mode,
channel C and D
Open
Pin 1: Trigger ready signal, 1.8-V logic
Pin 2: Ground
SW1
ADC Reset
N/A
Press to reset ADC and its registers.
J15
ADS58J64 SPI Monitoring Header, ADC
SPI
OPEN
Pin1: SCK
Pin2: SEN
Pin3: SDIO
Pin4: SDO
J14
JTAG Programming Header for CPLD, U3
OPEN
Pin1: TCK
Pin3: TDO
Pin4: +1.8 V
Pin5: TMS
Pin9: TDI
Pin2, Pin10: GND
A.2 Connector Descriptions
Table 9 lists the EVM connectors and their function.
Table 9. Connector Descriptions
Connector Description
AIN (J1) Receiver (ADS58J64) analog input, channel A
BIN (J7) Receiver (ADS58J64) analog input, channel B
CIN (J8) Receiver (ADS58J64) analog input, channel C
DIN (J5) Receiver (ADS58J64) analog input, channel D
EXT_ADC_CLK (J6) Receiver (ADS58J64) external clock input
LMK_CLK_IN (J12) LMK04828 reference clock input
J13 USB3 mini connector for device configuration
J14 5-V power connector