Texas Instruments ADS58H4 Series, User Manual

Page: 4 / 21

GND
PWR
IN
ADS58H4x
CLKIN
CH B
J2 J3
J5
J10
J9
J8
J4 USB
DNI
J1
CHA
J7
J6
DNI
JP11
1
JP2
JP3
PDN
1
CHC
J11
J12
DNI
J13
J14
1
JP9
SNRB_EN
JP7
RESET
JP6
JP5
JP1 JP4
1
1
1
1
1
JP12
TRIG
IN
JP8
TRIG
RDY
JP10
HIRES
SW1
RESET
SW2
TRIG
EN
6VDC
D1
USB_PWR
D2
D3
TRIG
RDY
D4
HIRE
S
CHD
DNI
LVDS LVDS
Introduction
www.ti.com
4 SLAU455B – August 2012 – Revised May 2016
Submit Documentation Feedback
Copyright © 2012–2016, Texas Instruments Incorporated
ADS58H4x (ADS58H40/ADS58H43) EVM
1.3 EVM Connectors and Jumpers
Figure 3. ADS58H4x EVM Connector and Jumper Locations
The locations of the connectors, jumpers, pushbutton switches, and LEDs are shown in Figure 3 . The
EVM has power connectors or banana jacks connecting the main power for power distribution. The SMA
connectors connect the ADC input and ADC clock input to the ADC. Typically, the ADC inputs are
transformer coupled, accepting single-ended connections. The input circuit can be configured to connect
to two SMA connectors for differential signaling.
Table 2 lists the connector information for the EVM.
Table 2. ADS58H4x EVM Connectors
Reference Designator Description
J1 6 V (main) power input
J2 6 V (main) power input
J3 Ground return
J4 USB Mini-B connector
J5 SAMTEC high-speed LVDS connector
J6 CH A input (positive)
J7 CH A input (negative) DNI
J8 CH B input (positive)
J9 CH B input (negative) DNI
J10 ADC clock input
J11 CH C input (positive)
J12 CH C input (negative) DNI