Texas Instruments ADS1675REF, User Manual, Page: 10 / 24

ADS1675REF Plug-in Operation
www.ti.com
space
Step 2. Select ADS1675REF from the REF drop-down menu. The ADS1675REF plug-in appears in
the left pane, as shown in
Figure 4 .
Figure 4. ADS1675REF Plug-in Display Window
Step 3. The ADS1675REF plug-in window has a status area at the top of the screen. When the
plug-in is first loaded, the plug-in searches for the board. You will see a series of messages
in the status area that indicate this action, such as Connected (as
Figure 5 illustrates).
Figure 5. ADS1675REF Plug-in Status Information Display Window
Step 4. Apply power to the REF board and connect the board to an available PC USB port.
Step 5. If you have not yet loaded the XEM3010 system drivers, Windows will display the Windows
Found New Hardware Wizard sequence (illustrated in
Figure 6 through Figure 9 ). When
prompted, accept the Continue Anyway option as Figure 8 shows.
10 ADS1675REF SBAU162A – December 2009 – Revised September 2010
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated