ADS131E08EVM Overview
4
SBAU200C – June 2012 – Revised April 2020
Copyright © 2012–2020, Texas Instruments Incorporated
Performance Demonstration Kit for the ADS131E08
1.4
ADS131E08EVM Hardware
shows the hardware included in the ADS131E08EVM kit. Contact the factory at
if any component is missing. Also, it is highly recommended that you check the TI website at
to verify that you have the latest software.
Figure 2. ADS131E08EVM-PDK Kit
The complete kit includes the following items:
•
ADS131E08EVM printed-circuit board (PCB)
•
MMB0 (modular EVM motherboard)
An external power supply is required to power the MMB0 board. Any supply used to power the MMB0
board through the jack located at J2 must comply with the following requirements:
•
Output voltage: 5.5 VDC to 15 VDC
•
Maximum output current:
≥
500 mA
•
Output connector: barrel plug (positive center), 2.5-mm I.D. x 5.5-mm O.D. (9-mm insertion depth)
•
Complies with applicable regional safety standards
Summary of Contents for ADS131E08EVM-PDK
Page 31: ...Top Assembly Top Layer...
Page 32: ...Internal Layer 1 Internal Layer 2...
Page 33: ...Bottom Layer Bottom Assembly...