Texas Instruments ADS131E08EVM-PDK, User Manual, Page: 28 / 39

Bill of Materials (BOM), Layout, and Schematic
www.ti.com
28 SBAU200C – June 2012 – Revised April 2020
Submit Documentation Feedback
Copyright © 2012–2020, Texas Instruments Incorporated
Performance Demonstration Kit for the ADS131E08
6 Bill of Materials (BOM), Layout, and Schematic
This section contains the complete BOM, printed circuit board (PCB) layouts, and schematic diagrams for the ADS131E08.
NOTE: Board layouts are not to scale. These figures are intended to show how the board is laid out; they are not intended to be used for
manufacturing ADS131E08 PCBs.
6.1 Bill of Materials
Table 11 lists the bill of materials for the ADS131E08.
Table 11. ADS131E08 Bill of Materials
Item Qty Ref Des Description Manufacturer Part Number
1 1 N/A Printed Circuit Board TI 6527354
2 15 C1, C2, C3, C4, C5, C6, C11, C17, C39,
C40, C41, C44, C50, C68, C69
CAP CER 1UF 25V 10% X5R 0603 Murata GRM188R61E105KA12D
3 0 C7, C8, C15, C19, C26, C28, C30, C32,
C33, C34, C35, C36, C48, C54, C59
Not Installed
4 1 C9 CAP CER 22UF 6.3V 10% X5R 0805 Taiyo Yuden JMK212BJ226KG-T
5 11 C10, C37, C38, C42, C43, C46, C47, C52,
C53, C57, C58
CAP CER 10UF 10V 10% X5R 0805 Murata GRM219R61A106KE44D
6 10 C12, C13, C14, C16, C18, C49, C61, C62,
C75, C76
CAP CER 0.1UF 50V 10% X7R 0603 Murata GRM188R71H104KA93D
7 16 C20, C21, C22, C23, C24, C64, C65, C66,
C67, C70, C71, C72, C73, C74, C77, C78
CAP CER 470PF 50V C0G 5% 0603 TDK C1608C0G1H471J
8 0 C25, C27, C29 Not Installed
9 0 C31 Not Installed
10 4 C45, C51, C55, C56 CAP CER 2.2UF 6.3V 10% X5R 0603 Murata GRM185R60J225KE26D
11 2 C60, C63 CAP CER 100UF 10V 20% X5R 1210 Taiyo Yuden LMK325BJ107MM-T
12 0 D1–D16 Not Installed
13 1 J1 (Top side) 10 Pin, Dual Row, SM Header (20 Pos.) Samtec TSM-110-01-T-DV-P
14 1 J1, J2 (Bottom side) 10 Pin, Dual Row, SM Header (20 Pos.) Samtec SSW-110-22-F-D-VS-K
15 1 J3 (Bottom side) 5 Pin, Dual Row, SM Header (10 Pos.) Samtec SSW-105-22-F-D-VS-K
16 0 J4 Not Installed
17 8 J5–J12 TERMINAL BLOCK 3.5MM 2POS PCB On Shore ED555/2DS
18 8 JP1, JP5–JP11 3 Position Jumper _ .1" spacing Samtec TSW-103-07-T-S
19 0 JP2 Not Installed
20 2 JP3, JP4 2 Position Jumper _ .1" spacing Samtec TSW-102-07-T-S
21 0 JP12 Not Installed