Texas Instruments ADS127L11EVM, User Manual, Page: 17 / 35

6.3 EVM GUI Global Settings for ADC Control
Figure 6-4 shows that the EVM global controls are located on the left-hand side of the GUI. These controls
include the number of samples, master clock frequency, SCLK frequency, sampling rate, and others. In the
upper left-hand side of the GUI is the
Pages control that allows access to the other key pages in the GUI. Figure
6-4 also shows the ADC register settings. The registers can be used to set the different device modes such as
filter settings and power settings.
Figure 6-4. EVM GUI Global Settings for ADC Control
www.ti.com EVM Operation
SBAU351 – APRIL 2021
Submit Document Feedback
ADS127L11EVM-PDK Evaluation Module 17
Copyright © 2021 Texas Instruments Incorporated