Quick Start
8
SBAU324 – September 2018
Copyright © 2018, Texas Instruments Incorporated
ADS1278EVM-CVAL Evaluation Module User's Guide
Figure 6. Set Operating Mode to High-Resolution
•
In ADCPro, select the
MultiScope
plug-in in the
Test
drop-down menu as shown in
.
Figure 7. Select Test=>MultiScope
•
In ADCPro, select the
Continuous
button to begin continuous conversions. Confirm that the signal
being applied to Channel 1 is being captured and displayed in the
Multichannel Scope
window as
shown below and that the signal is roughly 1 Vpp-diff.