www.ti.com
4
Using the PC Software
4.1
Installation and Setup
4.1.1
First Time Connection of the ADS123xREF
4.2
The Display
Using the PC Software
The ADS1230REF is supplied with software that performs various analyses on data received from the
board via the USB connection. It also provides a means of recording received data to a file.
The program currently runs only on a Microsoft Windows
®
platform. In Windows, the program
communicates with the ADS1230REF using a virtual COM port driver that causes the USB connection to
appear to Windows as a normal serial port. The necessary driver is installed with the EVM software.
The ADS1230REF software is distributed in an installer program called
ADS123x-setup-withLVRT-1.1.1.exe
(the version number in the file name may differ), distributed on
the CD-ROM or available from Texas Instruments. To install the software, execute this program. The
program guides you through the installation process.
Note the following points:
•
The installer installs two packages: the ADS123xREF program itself, and the TI Virtual COM Port
driver.
•
If any version of the ADS123xREF program is already installed, the installer uninstalls it and quits. You
must run the installer again to complete the installation.
•
If the Virtual COM Port driver is already installed, the installer offers to uninstall it. Do not uninstall it;
cancel this part of the installation.
The installer displays messages reminding you of these points.
If the ADS1230REF has never been connected to your computer before, Windows detects the device as
unknown hardware and takes you through a series of dialogs to install the correct driver. Accept the
default settings; the driver is present and only needs to be copied to the correct location. If the driver is
successfully installed, Windows does not issue this prompt again.
On some computers, if the board is connected to a different USB port, the operating system detects the
board as new hardware. If this action occurs, proceed through the new hardware dialogs as usual, and
allow Windows to reinstall the driver.
The ADS1230REF software has a single display; see
Figure 6
for a typical display. The major elements of
the display discussed next.
Strip chart: This feature displays a scrolling graph of data received from the board.
Histogram: A sliding histogram of data received from the board is also displayed. The number of points
used in the analysis is adjustable.
14
ADS1230REF User's Guide
SBAU125A – August 2007 – Revised September 2007
Submit Documentation Feedback