ADS1278EVM-PDK Kit Operation
www.ti.com
Step 3.
Plug the ADS1278EVM into the MMB0, as
illustrates.
Figure 9. Connecting ADS1278EVM to MMB0
CAUTION
Do not misalign the pins when plugging the ADS1278EVM into the MMB0.
Check the pin alignment carefully before applying power to the PDK.
Step 4.
Set the jumpers and switches on the ADS1278EVM as shown in
(note that these
settings are the factory-configured settings for the EVM). Note that the default configuration
for the EVM is to use external
±
10V supplies for the input amplifiers.
ADS1178EVM, ADS1278EVM, ADS1178EVM-PDK, and ADS1278EVM-PDK
16
SBAU129C – November 2007 – Revised July 2008