ADS1274EVM-PDK Kit Operation
www.ti.com
space
Step 3.
Plug the ADS1274EVM into the MMB0 as
illustrates.
Figure 10. Connecting ADS1274EVM to MMB0
CAUTION
Do not misalign the pins when plugging the ADS1274EVM into the MMB0.
Check the pin alignment carefully before applying power to the PDK.
Step 4.
Set the jumpers and switches on the ADS1274EVM as shown in Figure 7 (note that these
settings are the factory-configured settings for the EVM). Note that the default configuration
for the EVM is to use external
±
10V supplies for the input amplifiers.
ADS1174EVM, ADS1274EVM, ADS1174EVM-PDK, and ADS1274EVM-PDK
14
SBAU134A – August 2008 – Revised May 2009