ADS1246EVM-PDK Kit Operation
8.2
Setting Up the ADS1246EVM-PDK
The ADS1246EVM-PDK contains both the ADS1246EVM and the MMB3 motherboard; however, the
devices are shipped unconnected. Follow these steps to set up the ADS1246EVM-PDK.
Step 1.
Unpack the ADS1246EVM-PDK kit.
Step 2.
Set the switches on the MMB3 as described below, as shown in
•
Set switch SW4 to the right.
•
Set the DAC switch (SW5) to the OUT position (to the right).
Figure 6. MMB3 Switch Locations
10
ADS1146EVM, ADS1246EVM, ADS1146EVM-PDK, ADS1246EVM-PDK
SBAU149B
–
June 2009
–
Revised May 2011
Copyright
©
2009
–
2011, Texas Instruments Incorporated
