Texas Instruments ADC364x, User Manual, Page: 4 / 34

If an external 5-V supply is desired, J8 must be shunted in the 1-2 position, and the external 5 V can be
connected to the test point labeled "+5 EXT".
Figure 2-2. CMOS FPGA Interposer Card
2.2 Required Equipment
• The following equipment is included in the EVM evaluation kit:
– ADC364x Evaluation board (EVM)
– CMOS FPGA Interposer Card
– Power supply clips for Interposer Card
– Mini-USB cable
The following equipment is not included in the EVM evaluation kit, but is required for evaluation of this EVM:
• TSW1400EVM data capture board and related items
•
HSDC Pro software
• PC running Microsoft ® Windows ® 7, or 10
• One low-noise signal generators for the analog input (If using external clock option, additional signal
generator is required).
TI recommends the following generators:
• Rohde & Schwarz SMA100A
• Rohde & Schwarz SMA100B
Bandpass filter for the analog input signal. The following recommended bandpass filter will have:
• Bandpass filter, greater than or equal to 60-dB harmonic attenuation, less than or equal to 5% bandwidth,
greater than 18-dBm power, less than 5-dB insertion loss
• Signal-path cables, SMA
Equipment www.ti.com
4 ADC364xEVM Evaluation Module SBAU232 – OCTOBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated