If an external 5-V supply is desired, J8 must be shunted in the 1-2 position, and the external 5 V can be
connected to the test point labeled "+5 EXT".
Figure 2-2. CMOS FPGA Interposer
2.2 Required Equipment
The following equipment is included in the EVM evaluation kit:
• Evaluation board (EVM)
• CMOS FPGA Interposer Card
• Power supply clips for Interposer Card
• Mini-USB cable
The following equipment is
not
included in the EVM evaluation kit, but is required for evaluation of this EVM:
• TSW1400EVM data capture board and related items
•
software
• PC running Microsoft
®
Windows
®
7, or 10
• Two low-noise signal generators for the sampling clock and analog input. TI recommends the following
generators:
– Rohde & Schwarz SMA100A
– Rohde & Schwarz SMA100B
• Bandpass filter for the analog input signal. The following recommended bandpass filter will have:
– Bandpass filter, greater than or equal to 60-dB harmonic attenuation, less than or equal to 5% bandwidth,
greater than 18-dBm power, less than 5-dB insertion loss
• Signal-path cables, SMA
Equipment
SBAU294 – JULY 2020
ADC3541EVM Evaluation Module
3
Copyright © 2020 Texas Instruments Incorporated
